A range of performance parameters

一、性能參數范圍

      ...

Model and significance

二、型號及意義

       ...

Principles and characteristics

三、原理和特性

Three principles and characteristics of single screw is made according to the operation of tooth displacement principle of work of the new pump, main working parts are eccentric screw (rotor) and fixed bush (stator) due to the special geometry, the two parts respectively form a single seal cavity, medium by axial uniform flow, the internal flow velocity is low, volume is kept constant, the pressure is stable, so that it can't be produce eddy current and agitationEvery level of the pump output pressure 0.6 Mpa, head of 60 m (water), self-priming height is in commonly more than 3 m, because of the stator of a variety of moving materials, so this kind of pump of high viscosity fluid conveying and containing hard suspended particles medium or medium containing fiber transmission, have a general pump is not up to the characteristics of the flow rate is proportional to the speed of transmission way has a direct drive motor and pump axis, or use speed regulating motor reducer motor has generally enclosed, explosion-proof and pump shaft transmission for users to choose and buy 

單螺桿是按運轉齒合容積式原理工作的新型泵重，主要工作部件是偏心螺桿（轉子）和固定的襯套（定子）。由于該二部件的特殊幾何形狀，分別形成單獨的密封容腔，介質由軸向均勻推行流動，內部流速低，容積保持不變，壓力穩定，因而不會(huì )產生渦流和攪動。每級泵的輸出壓力位0.6Mpa，揚程60M（清水），自吸高度一般在3M以上，因定子選用多種前行材料制成，所以這種泵對高粘度流體的輸送和含有硬質懸浮顆粒介質或含有纖維介質的輸送，有一般泵所不能勝任的特性，其流量與轉速成正比。傳動方式有電機與泵軸直接傳動，或采用調速電機、減速機。電動機有一般封閉式，防爆式與泵軸傳動供用戶選購。

Table of performance parameters of four G type single screw pump

四、G型單螺桿泵性能參數表

...